ASLi (CHINA) TEST EQUIPMENT CO., LTD
AI SI Li (CHINA) TEST EQUIPMENT CO., LTD High Quality Assurance , Good After-sales Coexistence !
Add to Cart
With one or four working position, can test one or four specimen simultaneously.
Light source part: It adopts 16 (470cm) irradiating germicidal lamps, sterilized on all sides. It is evenly distributed in the furnace. It can be installed on the top and bottom. It can be sterilized on all sides to achieve a strong sterilization effect. There is a reflective device (mirror stainless steel plate in the inner box). When the product passes through the sterilization line, the use rate of ultraviolet light can be greatly increased up to 90%. Each group of germicidal lamps can be controlled individually, and an adjusting device that can adjust the angle of the UV lamp is added. The wave peak is 253.7nm. Monitor the use time of the lamp at any time to facilitate the replacement of the lamp. : Ultraviolet tube radiation (irradiation) dose can radiate more than 70μW / cm2.
| Total equipment length | 2000mm |
| Working area | 1000mm |
| Feeding operation area | 500mm |
| Discharging operation area | 500mm |
| Entrance height | 200mm |
| Entrance width | 500mm |
| Conveyor belt from the ground | 750 ± 20mm |
| Outer body of working area tunnel | 1.2mm high quality stainless steel |
| Working chamber tunnel cavity | 1.0mm mirror stainless steel plate |
| Body support frame | a set of square steel (stainless steel) |
| Air transport system | 1 set of forced air transport exhaust fan (extracts harmful gas) |
| Conveyor belt | Teflon mesh belt |
| Ultraviolet tube | use 16 (20W) UV germicidal tubes. Install up, down, left and right. (The tube is a vulnerable part: no warranty) |
| Balance device | 4 horizontal feet |
| Sterilization masks quantity | 30-40 sterilization masks per minute. Masks stay in the lamp for 60 seconds. The effect is the best |
| Main switch | 20A |
| Total power | 1.5KW |
| Range of electronic belt stepless speed regulation | 0-3m / min |
| Transportation motor | (ordinary motor) 0.75KW (1:20) |
| Governor | electronic stepless speed regulation |
| Exhaust fan | D-125 (1 set)warranty) |
| Voltmeter | 220V |
| Working voltage | 220V (± 5) 50Hz |
