ASLi (CHINA) TEST EQUIPMENT CO., LTD
AI SI Li (CHINA) TEST EQUIPMENT CO., LTD High Quality Assurance , Good After-sales Coexistence !
Add to Cart
20KN Vertical Computer Servo Control Tensile Strength Tester for Weld Joint
Application:
20KN Vertical Computer Servo Control Tensile Strength Tester for Weld Joint is an electrically operated machine that is used for testing tensile strength and elongation of materials like plywood, wires, cables, conductors, ferrous and non-ferrous materials.
Computer Servo Control Tensile Strength Tester Technical Parameters:
| Model | AS-PC-Volume |
| Capacity (Kg) | 50,100,200,500,1000,2000,5000,10000,20000 |
| Load Accuracy | 0.4% |
| Load Resolution | 1/100,000 |
| Valid Width (mm) | 400 |
| Max. Route (mm) | 1000(not including clamp) |
| Test Speed (mm/Min.) | 0.1~500(1000) |
| Speed Accuracy | ±0.5% |
| Motor | AC servo motor |
| Volume WxHxD (mm) | 1750x3310x1220 |
| Weight (Kg) | 300 |
| Power | AC220V 1 phase 3 lines |
20KN Vertical Computer Servo Control Tensile Strength Tester Features:
1. Force value and deformation can display at the same time.
2. Drive by servo motor, stand-alone can sent testing speed directly.
3. Press Start button the machine will testing automatic after setting.
4. After finishing testing, it can self-return.
5. Fast disassembly joint, can use different kinds grips.
6. Single button testing function, easy operation
7. Direct-connected to printer, print out report.
Main Mechanism
1 High stiffness gantry frame structure adopted, with high strength and small deformation.
2 Adopt imported high precision ball screw, transmitted efficient and smoothly.
3 Transmission part adopt Arc-gear synchronous belt transmission, with no clearance in the bidirectional transmission process.
4 Adopt AC motor and drive system to ensure the stable transmission and torque, with over current, over voltage, overload protection devices, speed ratio of 1:10 0000;
5 With special designed clamp, it can fix firmly and easy to operate ,without jaw sliding phenomenon.
6 Special process ensured machine alignment, eliminate the influence of irregular sample to sensor.
Warranty: one year free warranty for whole set machine,lifelong time maintainance.
After-sale service: feedback within 8 hours after get the call or email.
For the package:
1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK
Computer Servo Control Tensile Strength Tester Shipping Detail:
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. 20KN Vertical Computer Servo Control Tensile Strength Tester for Weld Joint is our star products , and we had obtained the CE certification for this machine.