ASLi (CHINA) TEST EQUIPMENT CO., LTD
AI SI Li (CHINA) TEST EQUIPMENT CO., LTD High Quality Assurance , Good After-sales Coexistence !
Add to Cart
SS-25 Mechanical Tester for Acceleration Shock Test Manufacturer
Application:
SS-25 Digital Mechanical Tester for Acceleration Shock Test Manufacturer is mainly used for small products for impact test, to assess the product’s ability to withstand shock damage. It is often used in electronic components, electronic circuit boards and other environmental testing.
SS-25 Acceleration Shock Tester Technical Parameters:
| Model | SS-5 | SS-10 | SS-25 | SS-50 | SS-100 | SS-200 | SS-400 | |
| Load Capacity (Kg) | 5 | 10 | 25 | 50 | 100 | 200 | 400 | |
| Table Size (mm) | 120x120 | 200x200 | 350x350 | 450x450 | 650x650 | 750x750 | 850x850 | |
| Pulse Acceleration (m/s2) | Half Sine Wave | 150~15000 | 150~15000 | 150~15000 | 150~6000 | 150~6000 | 150~3500 | 150~1500 |
| Trapezoid Wave | 300~1000 | 300~1000 | 300~1000 | 300~1000 | 300~1000 | 300~1000 | 300~500 | |
| Sawtooth Wave | 150~1000 | 150~1000 | 150~1000 | 150~1000 | 150~1000 | 150~1000 | 150~500 | |
| Pulse width | Half Sine Wave | 0.5~18 | 0.6~18 | 0.8~25 | 1.5~30 | 1.5~30 | 2~30 | 6~30 |
| Trapezoid Wave | 6~12 | 6~12 | 6~18 | 6~12 | 6~12 | 6~12 | 6~12 | |
| Sawtooth Wave | 6~18 | 6~18 | 6~18 | 6~18 | 6~18 | 6~18 | 6~18 | |
| Drive Mode | Mechanical drive | Hydraulic drive | ||||||
| External Dimension WxHxD (mm) | 800x2200x900 | 800x2200x900 | 850x2250x950 | 1000x2600x1300 | 1100x2700x1400 | 1300x2700x1600 | 1300x2700x1650 | |
| Weight (Kg) | 600 | 700 | 900 | 2600 | 3300 | 4000 | 4500 | |
| Hydraulic Oil | No #46 hydraulic oil | |||||||
| Power | AC 380V 50/60HZ | |||||||
The curve after test:
Shock Test Machine Features:
1.Built-in self-protection device, no secondary impact,
2.Shock height controlled by digital
3.Good repeatability test data
4.Signal generator provides a variety of choice: half sine wave, trapezoidal wave, sawtooth wave, square wave, etc.
5.Good vibration isolation performance, impact on the environment can control within the scope of the requirements:
6.Good Safety performance.
7.Conform to the IEC, MIL, GJB, JIS, ASTM and other international and domestic standard shock waves;
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. SS-25 Digital Mechanical Tester for Acceleration Shock Test Manufacturer is our star products , and we had obtained the CE certification for this machine.